SRTAG2K-D View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
SRTAG2K-D
STMicroelectronics
'SRTAG2K-D' PDF : 51 Pages View PDF
RF command sets
SRTAG2K-D
Before sending a ReadBinary command, a file shall be selected by using a Select
command.
The Response of the ReadBinary command is successful when the data to be read is within
the selected file (a); in other words, when the sum of P1-P2 and Le fields is equal to or lower
than the selected file length.
Table 29 defines the ReadBinary command.
Table 29. C-APDU of the ReadBinary command
Name
CLA
INS
P1 & P2
Lc
Data
0x00
0xB0
2 bytes
-
-
Class byte
Read instruction code
Offset in the file selected
-
-
Number of bytes to read between
0x01 ≤Le ≤max(Selected File length, 0xF6)
Le
1 byte
Table 30 defines the R-APDU of the ReadBinary command.
Length
Value
Value
Value
Value
Value
Table 30. R-APDU of the ReadBinary command
Data
SW1
SW2
Comment
-
1 byte
1 byte -
Content read
0x90
0x00
Command completed
-
0x67
0x00
Wrong length
-
0x69
0x82
Security status not satisfied
-
0x6A
0x82
File or application not found
-
0x6E
0x00
Class not supported
5.6.8
UpdateBinary command
On receiving the UpdateBinary command, the SRTAG2K-D writes the data field into the
selected file and sends back a status in the R-APDU response. If needed, M24SR will
request a timing extension (see Section 5.4).
Before sending an UpdateBinary command, a file shall be selected by issuing a Select
command.
Table 31 defines the UpdateBinary command.
28/51
a. For more details about CC file, refer to Section 3.1.2: CC file layout.
For more details about NDEF file, refer to Section 3.1.3: NDEF file layout.
For more details about System file, refer to Section 3.1.4: System file layout.
DocID025446 Rev 3
Share Link: 