SRTAG2KL
RF command sets
Length
Value
Value
Value
Value
Value
Table 43. R-APDU of the ExtendedReadBinary command
Data
SW1
SW2
comment
Le bytes
1 byte
1 byte
-
Content read
-
-
-
0x90
0x67
0x69
0x6A
0x00
0x00
0x82
0x82
Command completed
Wrong length
Security status not satisfied
File or application not found
-
0x6A
0x86
Incorrect P1 or P2 values
Note:
5.8.2
Note: For further return codes and definitions, refer to Section 5.6.2: Status and error codes.
EnablePermanentState command
The command configures the NDEF file to the ReadOnly or to the WriteOnly State.
This command can update the right access to the NDEF file by writing into the EEPROM. In
this case, the response timing will be around 6 ms.
Table 44 defines the EnablePermanentState requirement command.
Table 44. EnablePermanentState command format
Name
CLA
INS
P1 & P2
Lc
Data
Le
0xA2
0x28
2 bytes
-
-
-
Class byte
Instruction code
New security attributes
0x0001: Lock the NDEF file in read mode
0x0002: Lock the NDEF file in write mode
Other: RFU
(empty field)
(empty field)
(empty field)
Table 45 defines the R-APDU of the EnablePermanentState command.
Length
Value
Value
Value
Table 45. R-APDU table of the EnablePermanentState command
Data
SW1
SW2
comment
-
1 byte
1 byte -
-
0x90
0x00
Command completed
-
0x65
0x81
Update failed
-
0x69
0x82
Security status not satisfied
DocID026583 Rev 2
37/51