ST10F166 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'ST10F166' PDF : 62 Pages View PDF
ST10F166
18 ELECTRICAL CHARACTERISTICS
18.1 Absolute Maximum Ratings
Ambient temperature under bias (TA): . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70 °C
Storage temperature (TST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65 to +125 °C
Voltage on VCC pins with respect to ground (VSS) . . . . . . . . . . . . . . . . . –0.5 to +6.5 V
Voltage on any pin with respect to ground (VSS) . . . . . . . . . . . . . –0.3 to VCC +0.3 V
Input current on any pin during overload condition . . . . . . . . . . . . . . -10 to +10 mA.
Absolute sum of all input currents during overload condition . . . . . . . . . . . .100 mA.
Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 W
Flash programming voltage (VPP). . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 to + 13.5 V
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability. During overload condi-
tions (VIN>VCC or VIN<VSS) the voltage on pins with respect to ground (VSS) must not
exceed the values defined by the Absolute Maximum Ratings.
18.2 Parameter Interpretation
The parameters listed in the following partly represent the characteristics of the
ST10R165 and partly its demands on the system. To aid in interpreting the parame-
ters right, when evaluating them for a design, they are marked in column “Symbol”:
CC (Controller Characteristics):
The logic of the ST10R165 will provide signals with the respective timing characteris-
tics.
SR (System Requirement):
The external system must provide signals with the respective timing characteristics to
the ST10R165.
37/62
Share Link: 
