ST20-JPI-UK View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'ST20-JPI-UK' PDF : 10 Pages View PDF
ST20-JPI
®
PC PARALLEL PORT TO JTAG INTERFACE
PRODUCT INFORMATION
FEATURES
• Desktop mounted parallel port to JTAG inter-
face
• Standard 25 way D-type parallel port connec-
tion
• Standard 26 way D-type differential OS-Link
port for connection to a B300.
• Standard 20 way IDC cable for JTAG connec-
tion.
• Plug top power supply
• Supports nibble, byte and EPP mode parallel
port standards
DESCRIPTION
The ST20-JPI parallel port to JTAG interface is
a host interface to allow connection from a PC
parallel port to any JTAG diagnostic controller
based ST20 development board. The interface
plugs into any standard PC 25 way D-type
parallel port. Supported parallel port modes
are:
• Nibble mode
• Byte mode
• EPP mode
depending on which mode the host PC can
support. Connection to the development target
is via a 20 way IDC JTAG connector. Once
connected, the development target can be
accessed using the MS Windows drivers
supplied with the standard ST20 toolset.
September 1996
1/10
42 1685 00
Share Link: 
