®
ST6369
8-BIT HCMOS MCU FOR
DIGITAL CONTROLLED MULTI FREQUENCY MONITOR
PRELIMINARY DATA
4.5 to 6V supply operating range
8MHz Maximum Clock Frequency
User Program ROM:
7948 bytes
Reserved Test ROM:
244 bytes
Data ROM: user selectable size
Data RAM:
256 bytes
Data EEPROM:
384 bytes
40-Pin Dual in Line Plastic Package
Up to 23 software programmable general pur-
pose Inputs/Outputs, including 2 direct LED
driving Outputs
Two Timers each including an 8-bit counter with
a 7-bit programmable prescaler
Digital Watchdog Function
Serial Peripheral Interface (SPI) supporting
S-BUS/ I2C BUS and standard serial protocols
One 14-Bit PWM D/A Converter
Six 6-Bit PWM D/A Converters
One A/D converter with 0.5V resolution
Five interrupt vectors (HSYNC/NMI, Timer 1 & 2,
VSYNC, PWR INT.)
On-chip clock oscillator
ST6369 is supported by pin-to-pin EPROM and
OTP versions.
The development tool of the ST6369 microcon-
troller consists of the ST6369-EMU emulation
and development system to be connected via a
standard RS232 serial line to an MS-DOS Per-
sonal Computer.
1
PDIP40
(Ordering Information at the end of the datasheet)
DEVICE SUMMARY
DEVICE
ROM RAM EEPROM D/A
(Bytes) (Bytes) (Bytes) Conv.
ST6369
8K
256
384
7
February 1993
This is Preliminary information from SGS-THOMSON. Details are subject to change without notice.
1/67