STA003T View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'STA003T' PDF : 32 Pages View PDF
STA003T
PLLFRAC_L ([7:0])
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
PF7 PF6 PF5 PF4 PF3 PF2 PF1 PF0
PLLFRAC_H ([15:8])
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
PF15 PF14 PF13 PF12 PF11 PF10 PF9 PF8
Address: 0x64 - 0x65
Type: R/W
Software Reset: 0xC8-0x59
Hardware Reset: 0xC8-0x59
The registers are considered logically concate-
nated and contain the fractional values for the
PLL, used to select the internal configuration.
After Reset, the values are NA, and the opera-
tional setting are done when the MPEG synchro-
nisation is achieved.
The following formula describes the relationships
among all the STA003T fractional PLL parame-
ters:
OCLK_Freq
=
1
MFSDF(X)
+
1
⋅
MCLK_freq
PLLTL_N + 1
⋅
⋅
PLLCTL_M
+
1
+
PLLFRAC
65536
where:
PLLFRAC=256 x FRAC_H + PLLFRAC_L (decimal)
FRAME_CNT_L
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
FC7 FC6 FC5 FC4 FC3 FC2 FC1 FC0
FRAME_CNT_M
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
FC15 FC14 FC13 FC12 FC11 FC10 FC9 FC8
FRAME_CNT_H
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
FC23 FC22 FC21 FC20 FC19 FC18 FC17 FC016
Address: 0x67, 0x68, 0x69
Type: RO
Software Reset: 0x00
Hardware Reset: 0x00
The three registers are considered logically con-
catenated and compose the Global Frame
Counter.
They are updated at every decoded MPEG
Frame. The registers are reset on both hardware
and software reset.
AVERAGE_BITRATE
Address: 0x6A
Type: RO
Software Reset: 0x00
Hardware Reset: 0x00
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
AB7 AB6 AB5 AB4 AB3 AB2 AB1 AB0
AVERAGE_BITRATE is a read-only register and
it contains the average bitrate of the incoming bit-
stream. The value is rounded with an accuracy of
1 Kbit/sec.
SOFTVERSION
Address: 0x71
Type: RO
MSB
LSB
b7 b6 b5 b4 b3 b2 b1 b0
SV7 SV6 SV5 SV4 SV3 SV2 SV1 SV0
After the STA003T boot, this register contains the
version code of the embedded software.
22/32
Share Link: 
