STM8S105S6B6CTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STM8S105S6B6CTR

Access line, 16 MHz STM8S 8-bit MCU, up to 32 Kbyte Flash, integrated EEPROM, 10-bit ADC, timers, UART, SPI, I²C

STMicroelectronics 

Prev 71 72 73 74 75 76 77 78 79 80 Next

STM8S105xx

Electrical characteristics

Symbol

IDD(I 2 C)

IDD(ADC1)

Parameter

I2C supply current (2)

ADC1 supply current when converting(3)

Typ.

65

955

Unit

(1) Data based on a differential IDD measurement between reset configuration and timer

counter running at 16 MHz. No IC/OC programmed (no I/O pads toggling). Not tested in

production.

(2) Data based on a differential IDD measurement between the on-chip peripheral when kept

under reset and not clocked and the on-chip peripheral when clocked and not kept under

reset. No I/O pads toggling. Not tested in production.

(3) Data based on a differential IDD measurement between reset configuration and continuous

A/D conversions. Not tested in production.

10.3.2.8

Current consumption curves

The following figures show typical current consumption measured with code executing in

RAM.

Figure 13: Typ. IDD(RUN) vs. VDD , HSE user external clock, fCPU = 16 MHz

DocID14771 Rev 9

73/127

Share Link: