WM8804 View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
'WM8804' PDF : 66 Pages View PDF
WM8804
REGISTER
ADDRESS
R7
PLL5
07h
R8
PLL6
08h
BIT
LABEL
1:0 FREQMODE[1:0]
2
FRACEN
3
MCLKDIV
5:4 CLKOUTDIV[1:0]
3
CLKOUTSRC
4
CLKOUTDIS
5
FILLMODE
6
ALWAYSVALID
7
MCLKSRC
DEFAULT
Production Data
DESCRIPTION
10
PLL Post-scale Divider Select
Selects the PLL output divider value in
conjunction with MCLKDIV and CLKOUTDIV.
Refer to Table 23 for details of FREQMODE
operation.
Note: FREQMODE[1:0] bits are
automatically set in S/PDIF Receive Mode.
1
Integer/Fractional PLL Mode Select
0 = Integer PLL (PLL_N value used, PLL_K
value ignored)
1 = Fractional PLL (both PLL_N and PLL_K
values used)
Note: FRACEN must be set to enable the
fractional PLL when using S/PDIF Receive
Mode.
0
MCLK Divider Select
(Only valid when CLK2 is selected as MCLK
output source)
See Table 23 for MCLKDIV configuration in
PLL user mode.
See Table 28 for MCLKDIV configuration in
PLL S/PDIF receive mode.
01
CLKOUT Divider Select
(Only valid when CLK1 is selected as CLKOUT
output source)
See Table 23 for CLKOUTDIV[1:0]
configuration in PLL user mode.
See Table 28 for CLKOUTDIV[1:0]
configuration in PLL S/PDIF receive mode.
1
CLKOUT Pin Source Select
0 = Select CLK1
1 = Select OSCCLK
1
CLKOUT Pin Disable
0 = Pin Disabled (Pin tri-stated)
1 = Pin Enabled
0
Fill Mode Select
Determines S/PDIF receiver action when
corrupt or invalid data is detected:
0 = Data from S/PDIF receiver remains static
at last valid sample.
1 = Data from S/PDIF receiver is output as all
zeros.
0
Always Valid Select
Used to ignore the INVALID flag.
0 = Use INVALID flag.
1 = Ignore INVALID flag.
0
MCLK Output Source Select
0 = Select CLK2
1 = Select OSCCLK
w
PD Rev 4.1 September 2007
54
Share Link: 
