XE24S Configuration Registers
S107 I/O Configuration - S107 is a bit-mapped
register which defines the local I/O lines.
Bit 0 =0
=1
ADC0 and ADC1 defined as
digital I/O
ADC0 and ADC1 defined as
Analog inputs
Bit 1 = reserved
Bit 2 = 0 DIO0 defined as an output
= 1 DIO0 defined as an input
Bit 3 = 0 DIO1 defined as an output
= 1 DIO1 defined as an input
Bit 4 = 0 DIO2 defined as an output
= 1 DIO2 defined as an input
Bit 5 = 0 DIO3 defined as an output
= 1 DIO3 defined as an input
Bit 6 = 0 DIO4 defined as an output (Bit 0
must be equal to 0)
= 1 DIO4 defined as an input
Bit 7 = 0 - DIO5 defined as an output (Bit 0
must be equal to 0))
= 1 - DIO5 defined as an input
Default:193
S108 Transmit Level Control - S108 sets the
XE24S500 transmitter output level
Range: TBD
S110 RF Monitor Interval - S110 sets the
intervals that the XE24S500 wakes to check
for a valid RF carrier signal. Values from 1
to 60 set the interval in seconds. Teh dfault
value is 2 seconds.
Range: 1-60
Default: 2
XECOM
(14)
XE24S500