ACS8514 View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
ACS8514
Synchronous Equipment Timing Source Partner IC for 2nd T4 DPLL, Accurate Monitoring & Input Extender
Semtech Corporation
'ACS8514' PDF : 86 Pages View PDF
ACS8514 SETS Buddy
ADVANCED COMMS & SENSING FINAL
DATASHEET
Address(hex): 31
Register Name cnfg_sts_remote_sources_valid
Bit 7
Bit 6
Bit 5
Description
Bit 4
(R/W) Bits [13:8] of the remote
Default Value
sources valid register. A register used
to disable source that are invalid in
another device in a redundancy pair.
Bit 3
Bit 2
Bit 1
0011 1111
Bit 0
I14
I13
I12
I11
I10
I9
Bit No.
Description
Bit Value Value Description
[7:6]
Not used.
-
-
5
I14
Bit enabling input I14 to be considered for locking
to. If this bit is not set, then even if this input I14 is
valid, it will still not appear in register 0A & 0B.
4
I13
Bit enabling input I13 to be considered for locking
to. If this bit is not set, then even if this input I13 is
valid, it will still not appear in register 0A & 0B.
3
I12
Bit enabling input I12 to be considered for locking
to. If this bit is not set, then even if this input I12 is
valid, it will still not appear in register 0A & 0B.
2
I11
Bit enabling input I11 to be considered for locking
to. If this bit is not set, then even if this input I11 is
valid, it will still not appear in register 0A & 0B.
1
I10
Bit enabling input I10 to be considered for locking
to. If this bit is not set, then even if this input I10 is
valid, it will still not appear in register 0A & 0B.
0
I9
Bit enabling input I9 to be considered for locking to.
If this bit is not set, then even if this input I9 is valid,
valid, it will still not appear in register 0A & 0B.
0
Locking to input I14 disallowed.
1
Locking to input I14 allowed.
0
Locking to input I13 disallowed.
1
Locking to input I13 allowed.
0
Locking to input I12 disallowed.
1
Locking to input I12 allowed.
0
Locking to input I11 disallowed.
1
Locking to input I11 allowed.
0
Locking to input I10 disallowed.
1
Locking to input I10 allowed.
0
Locking to input I9 disallowed.
1
Locking to input I9 allowed.
Address(hex): 33
Register Name Mon_DPLL_ref_source
Bit 7
Bit 6
Bit 5
Bit No.
[7:4]
Description
Not used.
Description
Bit 4
(R/W) Register used for the selection Default Value
of a particular reference source to
the Monitor DPLL.
Bit 3
Bit 2
Bit 1
0000 1111
Bit 0
Mon_DPLL_ref_source
Bit Value Value Description
-
-
Revision 3.00 April 2007 © Semtech Corp.
Page 44
www.semtech.com
Share Link: 