ACS8514T View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
ACS8514T
Synchronous Equipment Timing Source Partner IC for 2nd T4 DPLL, Accurate Monitoring & Input Extender
Semtech Corporation
'ACS8514T' PDF : 86 Pages View PDF
ADVANCED COMMS & SENSING
Figure 18 AMI Input and Output Signal Levels
FINAL
ACS8514 SETS Buddy
DATASHEET
Figure 19 Recommended Line Termination for AMI Output/Output Ports
The AMI inputs I1 and I2 should be connected to the external AMI clock source by 470 nF coupling capacitor C1.
The AMI differential output TO2POS/TO2NEG should be coupled to a line transformer with a turns ratio of 3:1.
Components C2 = 470 pF and C3 = 2 nF. If a transformer with a turns ratio of 1:1 is used, a 3:1 ratio potential
divider Rload must be used to achieve the required 1 V pk-pk voltage level for the positive and negative pulses.
Revision 3.00 April 2007 © Semtech Corp.
Page 79
www.semtech.com
Share Link: 