ACS8520 View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
'ACS8520' PDF : 150 Pages View PDF
ACS8520 SETS
ADVANCED COMMUNICATIONS
Address (hex): 30
FINAL
DATASHEET
Register Name cnfg_sts_remote_sources_valid Description
(R/W) Bits [7:0] of the remote
sources valid register. A register
used to disable sources that are
invalid in another device in a
redundancy pair.
Default Value
1111 1111
Bit 7
I8
Bit 6
I7
Bit 5
I6
Bit 4
I5
Bit 3
I4
Bit 2
I3
Bit 1
I2
Bit 0
I1
Bit No.
Description
Bit Value Value Description
7
I8
Bit enabling input I8 to be considered for locking to.
If this bit is not set, then even if this input I8 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
6
I7
Bit enabling input I7 to be considered for locking to.
If this bit is not set, then even if this input I7 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
5
I6
Bit enabling input I6 to be considered for locking to.
If this bit is not set, then even if this input I6 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
4
I5
Bit enabling input I5 to be considered for locking to.
If this bit is not set, then even if this input I5 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
3
I4
Bit enabling input I4 to be considered for locking to.
If this bit is not set, then even if this input I4 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
2
I3
Bit enabling input I3 to be considered for locking to.
If this bit is not set, then even if this input I3 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
1
I2
Bit enabling input I2 to be considered for locking to.
If this bit is not set, then even if this input I2 is valid,
it will still not appear in Reg. 0A and 0B
(sts_priority_table).
0
Locking to input I8 disallowed.
1
Locking to input I8 allowed.
0
Locking to input I7 disallowed.
1
Locking to input I7 allowed.
0
Locking to input I6 disallowed.
1
Locking to input I6 allowed.
0
Locking to input I5 disallowed.
1
Locking to input I5 allowed.
0
Locking to input I4 disallowed.
1
Locking to input I4 allowed.
0
Locking to input I3 disallowed.
1
Locking to input I3 allowed.
0
Locking to input I2 disallowed.
1
Locking to input I2 allowed.
Revision 3.02/October 2005 © Semtech Corp.
Page 79
www.semtech.com
Share Link: 
