A falling edge at the LIN pin followed by a dominant bus level maintained for a certain time period (> tbus) and followed by a
rising edge at the LIN pin (see Figure 3-4) result in a remote wake-up request. The device switches from silent mode to
fail-safe mode. The remote wake-up request is indicated by a low level at the RXD pin to interrupt the microcontroller (see
Figure 3-4). EN high can be used to switch directly to normal mode.
Figure 3-4. LIN Wake-up from Silent Mode
Bus wake-up filtering time
tbus
Fail-safe mode
Normal mode
LIN Bus
Node in silent mode
RXD
High
Low
High
TXD
Watchdog
VCC
Voltage
Regulator
EN
NRES
Watchdog off
Silent mode 5V
Start watchdog lead time td
Fail safe mode 5V
Normal mode
EN High
Undervoltage detection active
ATA6612C/ATA6613C [DATASHEET]
13
9111L–AUTO–11/14