5/13/08
6.12.3 Invert PCM Signal Polarity
Configures the polarity of the digital input signal.
INV_PCMx
0
1
PCM Signal Polarity
Not Inverted
Inverted
CS42L52
6.12.4 Master Playback Mute
Configures a digital mute on the master volume control for channel x.
MSTxMUTE
0
1
Master Mute
Not Inverted
Inverted
Note: The muting function is affected by the DIGSFT (“Digital Soft Ramp” on page 53) and DIGZC
(“Digital Zero Cross” on page 53) bits.
6.13 Miscellaneous Controls (Address 0Eh)
7
6
5
4
PASSTHRUB PASSTHRUA PASSBMUTE PASSAMUTE
3
FREEZE
2
DEEMPH
1
DIGSFT
0
DIGZC
6.13.1 Passthrough Analog
Configures an analog passthrough from the PGA inputs to the headphone/line outputs.
PASSTHRUx
0
1
Analog In Routed to HP/Line Output
Disabled
Enabled
Notes:
1. The Passthrough volume control is realized using a combination of the PGA volume control settings
(“PGAx Volume” on page 56) and the headphone amplifier volume control settings (hidden). When
passthrough is enabled and the PGA to ADC path is selected, the signal seen by the ADC will change
depending on the passthrough volume setting.
6.13.2 Passthrough Mute
Configures an analog mute on the channel x analog in to analog out passthrough.
PASSxMUTE
0
1
Passthrough Mute
Disabled
Enabled
6.13.3 Freeze Registers
Configures a hold on all register settings.
FREEZE
0
1
Control Port Status
Register changes take effect immediately
Modifications may be made to all control port registers without the changes taking effect until after the
FREEZE is disabled.
52
DS680F1