DSPIC30F2011CT-20E/SP View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'DSPIC30F2011CT-20E/SP' PDF : 206 Pages View PDF
dsPIC30F2011/2012/3012/3013
TABLE 20-8: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic
Min Typ(1) Max Units
Conditions
VIL
Input Low Voltage(2)
DI10
I/O pins:
with Schmitt Trigger buffer
VSS
— 0.2 VDD V
DI15
MCLR
VSS
— 0.2 VDD V
DI16
DI17
OSC1 (in XT, HS and LP modes) VSS
OSC1 (in RC mode)(3)
VSS
— 0.2 VDD V
— 0.3 VDD V
DI18
SDA, SCL
VSS
— 0.3 VDD V SM bus disabled
DI19
VIH
SDA, SCL
Input High Voltage(2)
VSS
— 0.2 VDD V SM bus enabled
DI20
I/O pins:
with Schmitt Trigger buffer
0.8 VDD —
VDD
V
DI25
MCLR
0.8 VDD —
VDD
V
DI26
DI27
OSC1 (in XT, HS and LP modes) 0.7 VDD —
VDD
V
OSC1 (in RC mode)(3)
0.9 VDD —
VDD
V
DI28
SDA, SCL
0.7 VDD —
VDD
V SM bus disabled
DI29
ICNPU
SDA, SCL
CNXX Pull-up Current(2)
0.8 VDD —
VDD
V SM bus enabled
DI30
IIL
Input Leakage Current(2)(4)(5)
50
250 400 μA VDD = 5V, VPIN = VSS
DI50
I/O ports
—
0.01 ±1
μA VSS ≤ VPIN ≤ VDD,
Pin at high impedance
DI51
Analog input pins
— 0.50 —
μA VSS ≤ VPIN ≤ VDD,
Pin at high impedance
DI55
MCLR
—
0.05 ±5
μA VSS ≤ VPIN ≤ VDD
DI56
OSC1
—
0.05 ±5
μA VSS ≤ VPIN ≤ VDD, XT, HS
and LP Osc mode
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
3: In RC oscillator configuration, the OSC1/CLKl pin is a Schmitt Trigger input. It is not recommended that
the dsPIC30F device be driven with an external clock while in RC mode.
4: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
5: Negative current is defined as current sourced by the pin.
DS70139F-page 152
© 2008 Microchip Technology Inc.
Share Link: 
