DSPIC30F2011CT-20E/SP View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'DSPIC30F2011CT-20E/SP' PDF : 206 Pages View PDF
dsPIC30F2011/2012/3012/3013
TABLE 20-15: PLL CLOCK TIMING SPECIFICATIONS (VDD = 2.5 TO 5.5 V)
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol
Characteristic(1)
Min Typ(2) Max Units
Conditions
OS50 FPLLI
OS51 FSYS
PLL Input Frequency Range(2)
4
4
4
4
4
4
5(3)
5(3)
5(3)
4
4
4
On-Chip PLL Output(2)
16
—
10 MHz EC with 4x PLL
—
10 MHz EC with 8x PLL
—
7.5(4) MHz EC with 16x PLL
—
10 MHz XT with 4x PLL
—
10 MHz XT with 8x PLL
—
7.5(4) MHz XT with 16x PLL
—
10 MHz HS/2 with 4x PLL
—
10 MHz HS/2 with 8x PLL
—
7.5(4) MHz HS/2 with 16x PLL
— 8.33(3) MHz HS/3 with 4x PLL
— 8.33(3) MHz HS/3 with 8x PLL
—
7.5(4) MHz HS/3 with 16x PLL
—
120 MHz EC, XT, HS/2, HS/3
modes with PLL
OS52 TLOC PLL Start-up Time (Lock Time) —
20
50
μs
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
3: Limited by oscillator frequency range.
4: Limited by device operating frequency range.
TABLE 20-16: PLL JITTER
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature
-40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Characteristic
Min Typ(1) Max Units
Conditions
OS61
Note 1:
x4 PLL
— 0.251 0.413 % -40°C ≤ TA ≤ +85°C
— 0.251 0.413 % -40°C ≤ TA ≤ +125°C
— 0.256 0.47
%
-40°C ≤ TA ≤ +85°C
— 0.256 0.47
% -40°C ≤ TA ≤ +125°C
x8 PLL
— 0.355 0.584 % -40°C ≤ TA ≤ +85°C
— 0.355 0.584 % -40°C ≤ TA ≤ +125°C
— 0.362 0.664 % -40°C ≤ TA ≤ +85°C
— 0.362 0.664 % -40°C ≤ TA ≤ +125°C
x16 PLL
—
0.67 0.92
%
-40°C ≤ TA ≤ +85°C
— 0.632 0.956 % -40°C ≤ TA ≤ +85°C
— 0.632 0.956 % -40°C ≤ TA ≤ +125°C
These parameters are characterized but not tested in manufacturing.
VDD = 3.0 to 3.6V
VDD = 3.0 to 3.6V
VDD = 4.5 to 5.5V
VDD = 4.5 to 5.5V
VDD = 3.0 to 3.6V
VDD = 3.0 to 3.6V
VDD = 4.5 to 5.5V
VDD = 4.5 to 5.5V
VDD = 3.0 to 3.6V
VDD = 4.5 to 5.5V
VDD = 4.5 to 5.5V
© 2008 Microchip Technology Inc.
DS70139F-page 159
Share Link: 
