GAIN REGISTER—ADDRESS 0x0004
Non-Bit-Mapped, Default Value 0xA000
The gain register is scaled such that 0x8000 corresponds to a
gain of 1.0. The default value of this register is 1.25 (0xA000).
This results in a full-scale digital output when the input is at
80% of VREF, tying in with the maximum analog input range of
±80% of VREF p-p.
AD7764
OVERRANGE REGISTER—ADDRESS 0x0005
Non-Bit-Mapped, Default Value 0xCCCC
The overrange register value is compared with the output of the
first decimation filter to obtain an overload indication with
minimum propagation delay. This is prior to any gain scaling.
The default value is 0xCCCC, which corresponds to 80% of
VREF (the maximum permitted analog input voltage) Assuming
VREF = 4.096 V, the bit is then set when the input voltage exceeds
approximately 6.55 V p-p differential. The overrange bit is set
immediately if the analog input voltage exceeds 100% of VREF
for more than four consecutive samples at the modulator rate.
Rev. 0 | Page 29 of 32