EVM4717DBG View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
'EVM4717DBG' PDF : 22 Pages View PDF
Edge4717D
TEST AND MEASUREMENT PRODUCTS
PIN Description
Pin Name
VINP[0:3]
REF[0:3]
FORCE[0:3]
Pin #
Description
B19, H22, N21, V22 Analog voltage input which forces the output voltage (FV mode) and the
output current (FI mode) (one per channel).
A19, G22, M21, U22 Reference pin for divide by 2.5 circuit for force current mode; this reference
is typically set to 2.25V.
E2, J2, N2, U2
Analog output pin which forces current or voltage.
SENSE[0:3]
FV_FI*[0:3]
MI_MV*[0:3]
RS0[0:3]
RS1[0:3]
IVMIN[0:3]
IVMAX[0:3]
COMP_IN[0:3]
DUT_LTH[0:3]
DUT_GTL[0:3]
DISABLE[0:3]
E3, J3, N3, U3
Analog input pin which senses voltage.
A7, C11, A14, B17 TTL compatible input which determines whether the PMU is forcing current
or forcing voltage.
C9, B11, B14, C16 TTL compatible input which determines whether the PMU is measuring
current or measuring voltage.
C7, B9, C12, B15 TTL compatible current range select inputs.
C6, A8, B12, A15 TTL compatible current range select inputs.
C17, H20, M20, U21 Analog input voltages which establish the lower threshold level for the
measurement comparator.
C18, H21, N22, U20 Analog input voltages which establish the upper threshold level for the
measurement comparator.
D2, H2, M2, T2
Analog voltage input to measurement comparator.
AA13, Y12, AA10, Y9 Digital comparator output that indicates the DUT measurement is less than
the upper threshold.
AA14, AA12, Y11, AA9 Digital comparator output that indicates the DUT measurement is greater
than the lower threshold.
A6, B10, B13, B16 TTL compatible input which places IVMON output in high impedance.
HIZ[0:3]
B7, A10, C13, A17 TTL compatible input that places the FORCE output into high impedance.
RA[0:3]
RB[0:3]
RC[0:3]
RD[0:3]
SNK_MON[0:3]
SRC_MON[0:3]
SNK_OUT[0:3]
SRC_OUT[0:3]
F3, K3, P3, V3
External resistor input corresponding to Range A.
F2, K2, P2, V2
External resistor input corresponding to Range B.
F1, K1, P1, V1
External resistor input corresponding to Range C.
G3, L3, R3, W3
External resistor input corresponding to Range D.
F21, K22, R22, AA17 Analog voltage input to sink current clamp.
F22, L22, T22, Y16 Analog voltage input to source current clamp.
C1, G1, L1, R1
Clamp output.
E1, J1, N1, U1
Clamp output.
2005 Semtech Corp. / Rev. 5, 10/14/05
2
www.semtech.com
Share Link: 
