3.Optical Specifications
3.1.Optical Characteristics
Ta=25℃, 1/64 Duty, 1/9 Bias, VOD=14.0V (Note 4), θ= 0 ゚, φ=-゚
Parameter
Symbol
Conditions
Min. Typ. Max. Units
Contrast Ratio
Note 1
CR
θ= 0 ゚, φ=-゚
-
40
-
Chromaticity (white)
x
-
0.273 0.303 0.333
Note 2
y
-
0.311 0.341 0.371
Viewing Angle
Shown in 3.3
Response Rise Note 3
TON
-
-
140
210
ms
Time Decay Note 4
TOFF
-
-
100
200
ms
Note 1 : Contrast ratio is definded as follows.
CR = LON / LOFF
LON : Luminance of the ON segments
LOFF : Luminance of the OFF segments
Note 2 : Chromaticity at Backlight Sarface: x=0.345, y=0.330
Note 3 : The time that the luminance level reaches 90% of the saturation level from 0% when ON
signal is applied.
Note 4 : The time that the luminance level reaches 10% of the saturation level from 100% when OFF
signal is applied.
Note 5 : Definition of Driving Voltage VOD
Assuming that the typical driving waveforms shown below are applied to the LCD Panel at
1/A Duty - 1/B Bias ( A : Duty Number, B : Bias Number ). Driving voltage VOD is definded
as the voltage VO-P when the contrast ratio (CR=LON / LOFF) is at its maximum.
VO-P
1 / ( fF×A )
〈ON SIGNAL〉
1 / fF
( B-2 )×VO-P / B
〈OFF SIGNAL〉
F-51168NCU-FW-AA (AA) No.2000-0140
OPTREX CORPORATION
OPTREX
Page 8/18