Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

GS9035C View Datasheet(PDF) - Gennum -> Semtech

Part Name
Description
MFG CO.
GS9035C
Gennum
Gennum -> Semtech Gennum
'GS9035C' PDF : 14 Pages View PDF
1 2 3 4 5 6 7 8 9 10 Next
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply Voltage (VS)
Input Voltage Range (any input)
Operating Temperature Range
Storage Temperature Range
Lead Temperature (soldering, 10 sec)
VALUE
5.5V
VCC + 0.5 to VEE - 0.5V
0°C TA 70°C
-65°C TS 150°C
260°C
DC ELECTRICAL CHARACTERISTICS
VCC = 5.0V, VEE = 0V, TA = 0°C to 70°C unless otherwise stated, RLF = 1.8K, CLF1 = 15nF, CLF2 = 3.3pF.
PARAMETER
CONDITION
MIN
TYPICAL1
MAX
UNITS NOTES
TEST
LEVEL
Supply Voltage
4.75
5.00
5.25
V
3
Supply Current
CLK_EN = 0
-
90
110
mA
3
CLK_EN = 1
-
105
120
mA
3
DDI/DDI Common Mode Input
Voltage Range
VEE + (VDIFF/2)
0.4 to 4.6
VCC - (VDIFF/2)
V
2
3
DDI/DDI Differential Input
Drive
200
800
2000
mV
3
AUTO/MAN, SMPTE
High
2.0
-
-
V
3
Low
-
-
0.8
CLK_EN Input Voltage
High
2.5
-
-
V
3
Low
-
-
0.8
LOCK Output Low Voltage
ΙOH = 500µA
-
0.25
0.4
V
3
1
SS[1:0] Output Voltage
HIGH, ΙOH = -180µA,
4.4
4.8
-
V
1
Auto Mode
LOW, ΙOL = 600µA,
-
0.3
0.4
Auto Mode
SS[1:0] Input Voltage
HIGH, Manual Mode
2
-
-
V
3
LOW, ManualMode
-
-
0.8
CLK_EN Source Current
Low, VIL = 0V
-
26
55
µA
1
NOTES
1. TYPICAL - measured on EB-RD35A board.
2. VDIFF is the differential input signal swing.
3. LOCK is an open collector output and requires an
external pull-up resistor.
4. Pins SS[1:0] are outputs in AUTO mode and inputs in
MANUAL mode.
TEST LEVELS
1. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges.
2. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges using correlated test.
3. Production test at room temperature and nominal supply voltage.
4. QA sample test.
5. Calculated result based on Level 1,2, or 3.
6. Not tested. Guaranteed by design simulations.
7. Not tested. Based on characterization of nominal parts.
8. Not tested. Based on existing design/characterization data of similar
product.
9. Indirect Test.
10.Production test at room temperature.
GENNUM CORPORATION
2 of 14
20582 - 3
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]