LHF16KA7 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'LHF16KA7' PDF : 53 Pages View PDF
-- -
Sym.
V,,
hi
Parameter
Input Low Voltage
Input High Voltage
bL Output Low Voltage
VoH,
VOH2
Output High Voltage
VW
Output High Voltage
(CMOS)
LHFlGKA7
DC Characteristics (Continued)
V,,=2.N‘
V&.3V
Notes Min. Max. Min. Max. Unit
7 -0.5 0.8 -0.5 0.8 V
7
2.0 +k0c.5
2.0
Vcc
+0.5
v
Test
Conditions
V,,,, V,, Lockout Voltage during
4,7
1.5
1.5 v
Normal Operations
V,,,, ‘V,, Voltage during Write or
Erase Operations
2.7 3.6 -
-
V
V,,,, V,, Voltage during Write or
Erase Operations
3.0 3.6 3.0 3.6 V
VppHs V,, Voltage during Write or
Erase Operations
4.5 5.5 4.5 5.5 v
V, kn Vcc Lockout Voltage
2.0
2.0
V
NOTES:
1. All currents are in RMS unless otherwise noted. Typical values at nominal Vcc voltage and TA=+25”C.
2* ICC,, and bCES are specified with the device de-selected. If read or byte written while in erase suspend mode,
the device’s current draw is the sum of I,,,, or IccEs and lCCR or Iccw, respectively.
3. Includes STS.
4. Block erases, full chip erases, (multi) word/byte writes and block lock-bit configurations are inhibited when
V,+V,,,k, and not guaranteed in the range between V,,Lk(max.) and V,,,, (min.), between V,,,, (max.) and
VppHp(min.), between Vpp,+(max.) and VppHs(min.) and above VppHs(max.).
5. Automatic Power Savings (APS) reduces typical Iccn to 3mA at 2.7V and 3.3V Vcc in static operation.
6. CMOS inputs are either Vcc*O.2V or GNDkO.2V. TTL inputs are either V,, or V,,.
7. Sampled, net 100% tested.
’
i
Rev. 1.9
Share Link: 
