LPC47M112-MC View Datasheet(PDF) - SMSC -> Microchip
Part Name
Description
MFG CO.
LPC47M112-MC
SMSC -> Microchip
'LPC47M112-MC' PDF : 204 Pages View PDF
Enhanced Super I/O Controller with LPC Interface
Datasheet
SYMBOL
MT
N
NCN
ND
OW
PCN
POLL
PRETRK
R
RCN
SC
SK
SRT
NAME
DESCRIPTION
Multi-Track
Selector
When set, this flag selects the multi-track operating mode. In this
mode, the FDC treats a complete cylinder under head 0 and 1 as a
single track. The FDC operates as this expanded track started at the
first sector under head 0 and ended at the last sector under head 1.
With this flag set, a multitrack read or write operation will
automatically continue to the first sector under head 1 when the FDC
finishes operating on the last sector under head 0.
Sector Size Code
This specifies the number of bytes in a sector. If this parameter is
"00", then the sector size is 128 bytes. The number of bytes
transferred is determined by the DTL parameter. Otherwise the
sector size is (2 raised to the "N'th" power) times 128. All values up
to "07" hex are allowable. "07"h would equal a sector size of 16k. It
is the user's responsibility to not select combinations that are not
possible with the drive.
N SECTOR SIZE
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
…
…
07 16K Bytes
New Cylinder
Number
The desired cylinder number.
Non-DMA Mode When set to 1, indicates that the FDC is to operate in the non-DMA
Flag
mode. In this mode, the host is interrupted for each data transfer.
When set to 0, the FDC operates in DMA mode.
Overwrite
The bits D0-D3 of the Perpendicular Mode Command can only be
modified if OW is set to 1. OW id defined in the Lock command.
Present Cylinder The current position of the head at the completion of Sense Interrupt
Number
Status command.
Polling Disable
When set, the internal polling routine is disabled. When clear, polling
is enabled.
Precompensation Programmable from track 00 to FFH.
Start Track
Number
Sector Address
The sector number to be read or written. In multi-sector transfers,
this parameter specifies the sector number of the first sector to be
read or written.
Relative Cylinder Relative cylinder offset from present cylinder as used by the Relative
Number
Seek command.
Number of
The number of sectors per track to be initialized by the Format
Sectors Per Track command. The number of sectors per track to be verified during a
Verify command when EC is set.
Skip Flag
When set to 1, sectors containing a deleted data address mark will
automatically be skipped during the execution of Read Data. If Read
Deleted is executed, only sectors with a deleted address mark will be
accessed. When set to "0", the sector is read or written the same as
the read and write commands.
Step Rate Interval
The time interval between step pulses issued by the FDC.
Programmable from 0.5 to 8 milliseconds in increments of 0.5 ms at
the 1 Mbit data rate. Refer to the SPECIFY command for actual
delays.
SMSC DS – LPC47M112
Page 42
DATASHEET
Rev. 02-16-07
Share Link: 