M24256-BF View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M24256-BF' PDF : 47 Pages View PDF
DC and AC parameters
M24256-BW M24256-BR M24256-BF M24256-DR M24256-DF
Table 16. DC characteristics (M24256-BF, M24256-DF, device grade 6)
Symbol
Parameter
Test conditions(1) (in addition to
those in Table 9)
Min.
Max. Unit
ILI
Input leakage current VIN = VSS or VCC
(E1, E2, SCL, SDA) device in Standby mode
-
ILO
Output leakage current
SDA in Hi-Z, external voltage applied
on SDA: VSS or VCC
-
± 2 µA
± 2 µA
VCC = 1.7 V, fC = 400 kHz
ICC Supply current (Read)
fC = 1 MHz(2)
-
0.8
mA
-
2.5
ICC0 Supply current (Write) During tW 1.7 V < VCC < 2.5 V
ICC1
Standby supply current
Device not selected(4),
VIN = VSS or VCC, VCC = 1.7 V
VIL
Input low voltage
(SCL, SDA, WC, Ei)(5)
1.7 V ≤VCC < 2.5 V
Input high voltage
(SCL, SDA)
VIH Input high voltage
(WC, E2, E1, E0)(6)
1.7 V ≤ VCC < 2.5 V
1.7 V ≤ VCC < 2.5 V
-
2(3)
mA
-
1
µA
–0.45 0.25 VCC V
0.75 VCC 6.5
V
0.75 VCC VCC+ 0.6
VOL Output low voltage
IOL = 1 mA, VCC = 1.7 V
-
0.2
V
1.
If the application uses the voltage range F device
please refer to Table 14 instead of this table.
with
2.5
V
<
VCC
<
5.5
V
and
-40
°C
<
TA
<
+85
°C,
2. Only for devices identified by process letter K (see Table 18).
3. Characterized value, not tested in production.
4. The device is not selected after power-up, after a Read instruction (after the Stop condition), or after the
completion of the internal write cycle tW (tW is triggered by the correct decoding of a Write instruction).
5. Ei inputs should be tied to VSS(see Section 2.3).
6. Ei inputs should be tied to VCC (see Section 2.3).
28/47
DS1766 Rev 34
Share Link: 
