Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

NBSG11BA View Datasheet(PDF) - ON Semiconductor

Part Name
Description
MFG CO.
'NBSG11BA' PDF : 12 Pages View PDF
1 2 3 4 5 6 7 8 9 10 Next
NBSG11
Table 8. AC CHARACTERISTICS VCC = 0 V; VEE = −3.465 V to −2.375 V or VCC = 2.375 V to 3.465 V; VEE = 0 V
−40°C
25°C
85°C
Symbol
fmax
tPLH,
tPHL
tSKEW
Characteristic
Maximum Input Clock Frequency
(See Figure 3. Fmax/JITTER) (Note 23)
Propagation Delay to
Output Differential
Duty Cycle Skew (Note 24)
Within−Device Skew (Note 25)
Device−to−Device Skew (Note 26)
Min Typ Max Min Typ Max Min Typ Max Unit
10.5 12
10.5 12
10.5 12
GHz
90 125 160 90 125 160 90 125 160 ps
3
15
6
15
25 50
3
15
6
15
25 50
3
15 ps
6
15
25 50
tJITTER
VINPP
RMS Random Clock Jitter
fin < 10 GHz
Peak−to−Peak Data Dependent Jitter
fin < 10 Gb/s
Input Voltage Swing/Sensitivity
75
(Differential Configuration) (Note 27)
0.2 1
10.7
2600 75
0.2 1
ps
0.2 1
10.7
10.7
2600 75
2600 mV
tr
Output Rise/Fall Times
tf
(20% − 80%) @ 1 GHz
Q, Q 15
30 55
20
30 55
20
30 55 ps
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
23. Measured using a 500 mV source, 50% duty cycle clock source. All loading with 50 W to VCC − 2.0 V for QFN package. For minimum fmax
value of 10.5 GHz, output amplitude is approximately 200 mV (as shown in Figure 3, where output P−P spec is shown as a
minimum/guarantee of around 150 mV). Input edge rates 40 ps (20% − 80%).
24. See Figure 9. tSKEW = |tPLH − tPHL| for a nominal 50% Differential Clock Input Waveform.
25. Within−Device skew is defined as identical transitions on similar paths through a device.
26. Device−to−device skew for identical transitions at identical VCC levels.
27. VINPP (MAX) cannot exceed VCC − VEE.
600
500
OUTPUT AMP.
12340000ÑÑÑÑÑÑÑÑ00000 ÑÑÑÑÑÑÑÑÓÓÓÓÓÓÓÓ1 OÓÓÓÓÓÓÓÓÑÑUT2PÓÓÓÓÓÓÓÓÑÑÔÔÔÔÔÔÔÔUT3ÑÑÔÔÔÔÔÔÔÔÖÖÖÖÖÖÖÖP−PÑÑÖÖÖÖÖÖÖÖS4PEÑÑÖÖÖÖÖÖÖÖÑÑÑÑÑÑC5ÑÑÑÑÑÑÑÑÓÓÓÓÓÓÓÓÓÓÓÓÓÓÔÔÔÔÔÔ6 ÔÔÔÔÔÔ7 ÔÔÔÔÔÔÒÒÒÒÒ8ÒÒÒÒÒÕÕÕÕÕÕÕÕŠŠŠŠ9 ŠŠŠŠ10ŠŠŠŠÚÚÚ1ÚÚÚÒÒ1 ÒÒ12 ÒÒ
INPUT FREQUENCY (GHz)
Figure 3. Output Amplitude (VOUTPP) vs. Input Frequency (FIN) at Ambient Temperature (Typical)
http://onsemi.com
8
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]