PIC10LF320 View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'PIC10LF320' PDF : 210 Pages View PDF
PIC10(L)F320/322
11.6 Interrupt-On-Change Registers
REGISTER 11-1: IOCAP: INTERRUPT-ON-CHANGE PORTA POSITIVE EDGE REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
—
—
—
IOCAP3
IOCAP2
IOCAP1
IOCAP0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-4
bit 3-0
Note 1:
Unimplemented: Read as ‘0’.
IOCAP<3:0>: Interrupt-on-Change PORTA Positive Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a positive going edge. Associated Status bit and
interrupt flag will be set upon detecting an edge.( 1)
0 = Interrupt-on-Change disabled for the associated pin.
Interrupt-on-change also requires that the IOCIE bit of the INTCON register be set (Register 6-1).
REGISTER 11-2: IOCAN: INTERRUPT-ON-CHANGE PORTA NEGATIVE EDGE REGISTER
U-0
—
bit 7
U-0
U-0
U-0
R/W-0/0
R/W-0/0
R/W-0/0
R/W-0/0
—
—
—
IOCAN3
IOCAN2
IOCAN1
IOCAN0
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7-4
bit 3-0
Note 1:
Unimplemented: Read as ‘0’.
IOCAN<3:0>: Interrupt-on-Change PORTA Negative Edge Enable bits
1 = Interrupt-on-Change enabled on the pin for a negative going edge. Associated Status bit and
interrupt flag will be set upon detecting an edge.( 1)
0 = Interrupt-on-Change disabled for the associated pin.
Interrupt-on-change also requires that the IOCIE bit of the INTCON register be set (Register 6-1).
2011-2015 Microchip Technology Inc.
DS40001585D-page 75
Share Link: 
