PIC16C505
TABLE 10-2: EXTERNAL CLOCK TIMING REQUIREMENTS - PIC16C505 (CONTINUED)
AC Characteristics
Standard Operating Conditions (unless otherwise specified)
Operating Temperature
0°C ≤ TA ≤ +70°C (commercial),
–40°C ≤ TA ≤ +85°C (industrial),
–40°C ≤ TA ≤ +125°C (extended)
Operating Voltage VDD range is described in Section 10.1
Parameter
No.
Sym
Characteristic
Min Typ(1) Max Units
Conditions
3
TosL, TosH Clock in (OSC1) Low or High Time 50* —
—
ns XT oscillator
2*
—
—
µs LP oscillator
10
ns HS oscillator
4
TosR, TosF Clock in (OSC1) Rise or Fall Time
—
—
25* ns XT oscillator
—
—
50* ns LP oscillator
—
—
15 ns HS oscillator
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
2: All specified values are based on characterization data for that particular oscillator type under standard operating condi-
tions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or
higher than expected current consumption.
When an external clock input is used, the “max” cycle time limit is “DC” (no clock) for all devices.
TABLE 10-3: CALIBRATED INTERNAL RC FREQUENCIES - PIC16C505
AC Characteristics
Parameter
No.
Sym
Standard Operating Conditions (unless otherwise specified)
Operating Temperature
0°C ≤ TA ≤ +70°C (commercial),
–40°C ≤ TA ≤ +85°C (industrial),
–40°C ≤ TA ≤ +125°C (extended)
Operating Voltage VDD range is described in Section 10.1
Characteristic
Min* Typ(1) Max* Units
Conditions
Internal Calibrated RC Frequency
3.65 4.00 4.28 MHz VDD = 5.0V
Internal Calibrated RC Frequency
3.55 4.00 4.31 MHz VDD = 2.5V
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
© 1999 Microchip Technology Inc.
DS40192C-page 67