PIC16LC62X-04/JW View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'PIC16LC62X-04/JW' PDF : 112 Pages View PDF
PIC16C62X(A)
12.4 DC CHARACTERISTICS:
PIC16C62X(A) (Commercial, Industrial, Extended)
PIC16LC62X (Commercial, Industrial, Extended)
Standard Operating Conditions (unless otherwise stated)
Operating temperature –40˚C ≤ TA ≤ +85˚C for industrial and
0˚C ≤ TA ≤ +70˚C for commercial and
–40˚C ≤ TA ≤ +125˚C for extended
Operating voltage VDD range as described in DC spec Table 12-1 and Table 12-2
Param. Sym
No.
Characteristic
Min Typ† Max Unit
Conditions
VIL Input Low Voltage
I/O ports
D030
with TTL buffer
VSS
- 0.8V V VDD = 4.5V to 5.5V
0.15VDD
otherwise
D031
with Schmitt Trigger input VSS
0.2VDD V
D032
MCLR, RA4/T0CKI,OSC1 (in Vss
- 0.2VDD V Note1
RC mode)
D033
OSC1 (in XT and HS)
Vss
- 0.3VDD V
OSC1 (in LP)
Vss
- 0.6VDD-1 V
.0
VIH Input High Voltage
I/O ports
-
D040
with TTL buffer
2.0V
-
VDD V VDD = 4.5V to 5.5V
.25VDD +
VDD
otherwise
0.8V
D041
with Schmitt Trigger input 0.8VDD
VDD
D042
MCLR RA4/T0CKI
0.8VDD -
VDD V
D043
OSC1 (XT, HS and LP)
0.7VDD -
VDD V
D043A
OSC1 (in RC mode)
0.9VDD
Note1
D070 IPURB PORTB weak pull-up current
50 200 400 µA VDD = 5.0V, VPIN = VSS
Input Leakage Current
IIL (Notes 2, 3)
I/O ports (Except PORTA)
±1.0 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance
D060
PORTA
-
- ±0.5 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance
D061
RA4/T0CKI
-
- ±1.0 µA Vss ≤ VPIN ≤ VDD
D063
OSC1, MCLR
-
- ±5.0 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc
configuration
VOL Output Low Voltage
D080
I/O ports
-
-
0.6 V IOL=8.5 mA, VDD=4.5V, -40° to +85°C
-
-
0.6 V IOL=7.0 mA, VDD=4.5V, +125°C
D083
OSC2/CLKOUT
-
-
0.6 V IOL=1.6 mA, VDD=4.5V, -40° to +85°C
(RC only)
-
-
0.6 V IOL=1.2 mA, VDD=4.5V, +125°C
VOH Output High Voltage (Note 3)
D090
I/O ports (Except RA4)
VDD-0.7 -
-
V IOH=-3.0 mA, VDD=4.5V, -40° to +85°C
VDD-0.7 -
-
V IOH=-2.5 mA,
VDD=4.5V, +125°C
D092
OSC2/CLKOUT
VDD-0.7 -
-
V IOH=-1.3 mA, VDD=4.5V, -40° to +85°C
VDD-0.7 -
-
V IOH=-1.0 mA,
(RC only)
VDD=4.5V, +125°C
*
These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the
PIC16C62X(A) be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.
DS30235F-page 84
Preliminary
© 1997 Microchip Technology Inc.
Share Link: 
