PIC16LC62X-04/JW View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'PIC16LC62X-04/JW' PDF : 112 Pages View PDF
PIC16C62X(A)
12.4 DC CHARACTERISTICS:
PIC16C62X(A) (Commercial, Industrial, Extended)
PIC16LC62X (Commercial, Industrial, Extended) (Cont.)
Standard Operating Conditions (unless otherwise stated)
Operating temperature –40˚C ≤ TA ≤ +85˚C for industrial and
0˚C ≤ TA ≤ +70˚C for commercial and
–40˚C ≤ TA ≤ +125˚C for extended
Operating voltage VDD range as described in DC spec Table 12-1 and Table 12-2
Param. Sym
No.
Characteristic
Min Typ† Max Unit
Conditions
*
D100
VOD Open-Drain High Voltage
Capacitive Loading Specs
on Output Pins
COSC2 OSC2 pin
14* V RA4 pin
15 pF In XT, HS and LP modes when external
clock used to drive OSC1.
D101 Cio All I/O pins/OSC2 (in RC
50 pF
mode)
*
These parameters are characterized but not tested.
† Data in “Typ” column is at 5.0V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: In RC oscillator configuration, the OSC1 pin is a Schmitt Trigger input. It is not recommended that the
PIC16C62X(A) be driven with external clock in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on applied voltage level. The specified levels
represent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as coming out of the pin.
TABLE 12-2: COMPARATOR SPECIFICATIONS
Operating Conditions: Vdd range as described in Table 12-1, -40°C<TA<+125°C. Current consumption is specified in
Table 12-1.
Characteristics
Sym
Min
Typ
Max
Units
Comments
Input offset voltage
Input common mode voltage
± 5.0
± 10
mV
0
VDD - 1.5
V
CMRR
–35*
db
Response Time(1)
Comparator Mode Change to
Output Valid
150*
400*
600*
10*
ns PIC16C62X(A)
ns PIC16LC62X
µs
* These parameters are characterized but not tested.
Note 1: Response time measured with one comparator input at (VDD - 1.5)/2 while the other input transitions from
VSS to VDD.
TABLE 12-3: VOLTAGE REFERENCE SPECIFICATIONS
Operating Conditions:Vdd range as described in Table 12-1, -40°C<TA<+125°C. Current consumption is specified in
Table 12-1.
Characteristics
Sym
Min
Typ
Max
Units
Comments
Resolution
Absolute Accuracy
Unit Resistor Value (R)
Settling Time(1)
VDD/24
2K*
VDD/32
1/4
1/2
10*
LSB
LSB Low Range (VRR=1)
LSB High Range (VRR=0)
Ω Figure 8-2
µs
* These parameters are characterized but not tested.
Note 1: Settling time measured while VRR = 1 and VR<3:0> transitions from 0000 to 1111.
© 1997 Microchip Technology Inc.
Preliminary
DS30235F-page 85
Share Link: 
