SX8801IRXXMLTRT View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
'SX8801IRXXMLTRT' PDF : 135 Pages View PDF
XE8801A – SX8801R
14.8 Software hints
Example of program for a transmission with polling:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
parity, 9600 baud, enable Uart transmission).
2. Write a byte to RegUartTx.
3. Wait until the UartTxFull bit in RegUartTxSta register equals 0.
4. Jump to 2 to write the next byte if the message is not finished.
5. End of transmission.
Example of program for a transmission with interrupt:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
parity, 9600 baud, enable Uart transmission).
2. Write a byte to RegUartTx.
3. After an interrupt and if the message is not finished, jump to 2
4. End of transmission.
Example of program for a reception with polling:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
parity, 9600 baud, enable Uart reception).
2. Wait until the UartRxFull bit in the RegUartRxSta register equals 1.
3. Read the RegUartRxSta and check if there is no error.
4. Read data in RegUartRx.
5. If data is not equal to End-Of-Line, then jump to 2.
6. End of reception.
Example of program for a reception with interrupt:
1. The RegUartCmd register and the RegUartCtrl register are initialized (for example: 8 bit word length, odd
parity, 9600 baud, enable Uart reception).
2. When there is an interrupt, jump to 3
3. Read RegUartRxSta and check if there is no error.
4. Read data in RegUartRx.
5. If data is not equal to End-Of-Line, then jump to 2.
6. End of reception.
© Semtech 2005
14-7
www.semtech.com
Share Link: 
