ACPL-336J-000E View Datasheet(PDF) - Avago Technologies

Part Name

Description

MFG CO.

ACPL-336J-000E

2.5 Amp Gate Drive Optocoupler with Integrated (VCE) Desaturation Detection, Active Miller Clamping, Fault and UVLO Status Feedback

Avago Technologies 

1 2 3 4 5 6 7 8 9 10 Next

Table 1. IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*

Description

Symbol

Characteristic Unit

Installation classification per DIN VDE 0110/39, Table 1

for rated mains voltage ≤ 150 VRMS

for rated mains voltage ≤ 300 VRMS

for rated mains voltage ≤ 600 VRMS

for rated mains voltage ≤ 1000 VRMS

I – IV

I – IV

I – IV

I – III

Climatic Classification

40/105/21

Pollution Degree (DIN VDE 0110/39)

2

Maximum Working Insulation Voltage

VIORM

1414

Vpeak

Input to Output Test Voltage, Method b**

VPR

VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial discharge < 5 pC

2652

Vpeak

Input to Output Test Voltage, Method a**

VIORM x 1.6 = VPR, Type and Sample Test, tm = 10 sec, Partial discharge < 5 pC

VPR

2262

Vpeak

Highest Allowable Overvoltage (Transient Overvoltage tini = 60 sec)

VIOTM

8000

Vpeak

Safety-limiting values – maximum values allowed in the event of a failure.

Case Temperature

TS

175

°C

Input Current

IS, INPUT

400

mA

Output Power

PS, OUTPUT 1200

mW

Insulation Resistance at TS, VIO = 500 V

RS

>109

W

* Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.

Surface mount classification is class A in accordance with CECCOO802.

** Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section IEC/EN/

DIN EN 60747-5-5, for a detailed description of Method a and Method b partial discharge test profiles.

Table 2. Insulation and Safety Related Specifications

Parameter

Minimum External Air Gap

(Clearance)

Minimum External Tracking

(Creepage)

Minimum Internal Plastic Gap

(Internal Clearance)

Symbol

L(101)

L(102)

ACPL-336J

8.3

8.3

0.5

Tracking Resistance

CTI

(Comparative Tracking Index)

Isolation Group

>175

IIIa

Units

mm

mm

mm

V

Conditions

Measured from input terminals to output terminals,

shortest distance through air.

Measured from input terminals to output terminals,

shortest distance path along body.

Through insulation distance conductor to conductor,

usually the straight line distance thickness between the

emitter and detector.

DIN IEC 112/VDE 0303 Part 1

Material Group (DIN VDE 0110, 1/89, Table 1)

4

Share Link: