AD9910/PCBZ View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'AD9910/PCBZ' PDF : 60 Pages View PDF
AD9910
Software control requires that the EXT_PWR_DWN pin be
forced to a Logic 0 state. In this case, setting the desired power-
down bits (via the serial I/O port) powers down the associated
functional block, whereas clearing the bits restores the function.
Alternatively, all four functions can be simultaneously powered
down via external hardware control through the EXT_PWR_DWN
pin. When this pin is forced to Logic 1, all four circuit blocks are
powered down regardless of the state of the power-down bits.
That is, the independent power-down bits in CFR1 are ignored
and overridden when EXT_PWR_DWN is Logic 1.
Based on the state of the external power-down control bit, the
EXT_PWR_DWN pin produces either a full power-down or a
fast recovery power-down. The fast recovery power-down mode
maintains power to the DAC bias circuitry and the PLL, VCO,
and input clock circuitry. Although the fast recovery power-
down does not conserve as much power as the full power-down,
it allows the device to awaken very quickly from the power-
down state.
Rev. 0 | Page 42 of 60
Share Link: 
