E6F-AG5C-C7202M View Datasheet(PDF) - OMRON Corporation
Part Name
Description
MFG CO.
'E6F-AG5C-C7202M' PDF : 32 Pages View PDF
Setting ON/OFF Angles in Manual Mode
ON/OFF angles can be set manually using the ANGLE Keys
on the front of the Cam Positioner.
Example: Setting Step 1 of Cam No. 2 to Turn ON at 28° and
Turn OFF at 51°
Change the mode. Set the mode switch to PRGM.
Set the programming
mode switch.
Set the programming mode switch to MAN.
Mode
PRGM
TEST
RUN
Programming mode
TCH
MAN
Set the bank No.
Banks can be specified only for
16-/32-output models.
• Press the BANK Key to specify the bank number and
then press the WRITE Key.
Set the cam and step No.
• Press the CAM Keys
• Press the STEP Keys
to specify cam No. 2.
to specify step No. 1.
PRG
H8PS
Setting ON/OFF Angles in Teaching
Mode
ON/OFF angles can be set based on actual machine (Encoder)
operation.
Example: Setting the ON/OFF Angles by Teaching Step 2 of
Cam No. 3
Change the mode. Set the mode switch to PRGM.
Set the programming
mode switch.
Set the programming mode switch to TCH.
Mode
PRGM
TEST
RUN
Programming mode
TCH
MAN
Set the bank No.
Banks can be specified only for
16-/32-output models.
• Press the BANK Key to specify the bank number and
then press the WRITE Key.
Set the cam and step No.
• Press the CAM Keys
• Press the STEP Keys
to specify cam No. 3.
to specify step No. 2.
TST
CAM
STEP
Set the ON angle.
• Press the ON↑ ↓OFF Key to flash the "ON↑".
• Press the ANGLE Keys
to set an angle of 28
and then press the WRITE Key.
PRG
CAM
STEP
Set the OFF angle.
• Press the ON↑ ↓OFF Key to flash the "↓OFF".
• Press the ANGLE Keys
press the WRITE Key.
to set an angle of 51 and then
PRG
CAM
STEP
End
Note: Pressing the or Key continually will automatically increment or
decrement the value. Pressing the other key during automatic increment
or decrement will increase the speed.
CAM
STEP
Set the ON angle.
• Press the ON↑ ↓OFF Key to flash the "ON↑".
• Turn the machine (Encoder) to the desired ON angle.
(195° in this example)
• Press the WRITE Key.
TST
CAM
STEP
Set the OFF angle.
• Press the ON↑ ↓OFF Key to flash the "↓OFF".
• Turn the machine (Encoder) to the desired OFF angle.
(278° in this example)
• Press the WRITE Key.
TST
CAM
End
STEP
22
Share Link: 
