L/31ROPT1C View Datasheet(PDF) - Para Light Electronics
Part Name
Description
MFG CO.
'L/31ROPT1C' PDF : 12 Pages View PDF
3.0mm PHOTOTRANSISTOR
L-31ROPT1C
REV:A / 3
yLED MOUNTING METHOD
3) When mounting the LED by using a case, as shown Fig.4, ensure that the mounting holds on
the PC board match the pitch of the leads correctly-tolerance of dimensions of the respective
components including the LED should be taken into account especially when designing the
case, PC board, etc. to prevent pitch misalignment between the leads and board holes, the
diameter of the board holes should be slightly larger than the size of the lead. Alternatively, the
shape of the holes should be made oval. (See Fig.4)
case
pc board
Fig.4
4) Use LEDs with stand-off (Fig.5) or the tube or spacer made of resin (Fig.6) to position the LEDs.
Stand-off
Fig.5
Tube
Fig.6
DRAWING NO. : DS-21-02-0002
DATE : 2006-04-03
Page : 8
Share Link: 
