M95256-CS3G View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M95256-CS3G' PDF : 48 Pages View PDF
DC and AC parameters
M95256-DR, M95256, M95256-W, M95256-R
Table 14. DC characteristics (M95256-W, device grade 6)
Symbol
Parameter
Test condition
Min. Max. Unit
ILI
Input leakage current
VIN = VSS or VCC
ILO
Output leakage current
S = VCC, VOUT = VSS or VCC
VCC= 2.5 V, C = 0.1VCC/0.9VCC
at 5 MHz, Q = open
±2
µA
±2
µA
3
mA
VCC= 2.5 V, C = 0.1VCC/0.9VCC
at 10 MHz, Q = open
ICC
Supply current (Read)
VCC= 5.5 V, C = 0.1VCC/0.9VCC
at 5 MHz, Q = open
4(1)
mA
5
mA
VCC= 5.5 V, C = 0.1VCC/0.9VCC
at 20 MHz, Q = open
5(2)
mA
ICC0(3) Supply current (Write)
During tW, S = VCC,
2.5 V < VCC < 5.5 V
5
mA
ICC1
Supply current
(Standby Power mode)
S = VCC, VCC = 5.5 V,
VIN = VSS or VCC,
S = VCC, VCC = 2.5 V,
VIN = VSS or VCC,
5(4)
µA
5(5)
µA
VIL Input low voltage
–0.45 0.3 VCC V
VIH Input high voltage
0.7 VCC VCC+1 V
VOL Output low voltage
VCC = 2.5 V and IOL = 1.5 mA or
VCC = 5 V and IOL = 2 mA
0.4
V
VOH Output high voltage
VCC = 2.5 V and IOH = –0.4 mA or
VCC = 5 V and IOH = –2 mA
0.8 VCC
V
1. Preliminary data: 2mA with the new product identified with process letter K.
2. For new product identified with process letter K (preliminary data)
3. Characterized value, not tested in production.
4. 3 µA with the new product identified with process letter K (Preliminary data)
5. 2 µA with the new product identified with process letter K (Preliminary data)
32/48
Doc ID 12276 Rev 11
Share Link: 
