M95320-W View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M95320-W' PDF : 48 Pages View PDF
M95320-W M95320-R M95320-DR
DC and AC parameters
Table 16. DC characteristics (M95320-R, M95320-DR, device grade 6)
Symbol
Parameter
Test conditions(1)
Min.
Max. Unit
ILI
ILO
ICC
ICC0(3)
ICC1
VIL
VIH
VOL
VOH
VRES(3)
Input leakage
current
Output leakage
current
Supply current
(Read)
Supply current
(Write)
Supply current
(Standby)
Input low voltage
Input high voltage
Output low voltage
Output high voltage
Internal reset
threshold voltage
VIN = VSS or VCC
S = VCC, voltage applied on Q = VSS or VCC
VCC = 1.8 V, max clock frequency (fC),
C = 0.1VCC/0.9VCC, Q = open
VCC = 1.8 V, fC = 5 MHz,
C = 0.1VCC/0.9VCC, Q = open
VCC = 1.8 V, during tW, S = VCC
VCC = 1.8 V, S = VCC, VIN = VSS or VCC
1.8 V ≤VCC < 2.5 V
1.8 V ≤VCC < 2.5 V
IOL = 0.15 mA, VCC = 1.8 V
IOH = –0.1 mA, VCC = 1.8 V
±2
µA
±2
µA
2
mA
2(2)
5
mA
1
µA
–0.45 0.25 VCC V
0.75 VCC VCC+1
V
0.3
V
0.8 VCC
V
1.0(4)
1.65(5)
V
1. If the application uses the M95320-R device at 2.5 V ≤VCC ≤5.5 V and –40 °C ≤TA ≤+85 °C, please refer to Table 15: DC
characteristics (M95320-W, device grade 6), rather than to the above table.
2. For the device identified by process letter K.
3. Characterized only, not tested in production.
4. 0.7 V with the device identified by process letter K.
5. 1.3 V with the device identified by process letter K.
Doc ID 5711 Rev 14
35/48
Share Link: 
