PC104 View Datasheet(PDF) - PMD
Part Name
Description
MFG CO.
'PC104' PDF : 70 Pages View PDF
Using Pro-Motion
3
3.4.2 Scope Window Settings
Clicking the show settings button on the scope window control bar opens the scope settings window below the
oscilloscope display.
The scope window can simultaneously display trace data for 1 to 4 motion processor variables. Individual traces
are selected and configured using the controls in this window as specified.
Control
Variable, axis
Value at cursor
Load
Trigger: start, axis, bit, state
Trace period
Trace mode
Description
These dropdown lists select which motion processor variables from which
axes shall be displayed in the trace window. Selecting none for any entry
disables that entry and any of the following entries in the trace list.
Displays the value under the data probe cursor when cursor is active.
Load the trace buffer settings from the motion processor into Pro-Motion.
The controls are used to set the scope trace to start and stop automatically
when the selected motion processor state is selected.
Sets the number of motion processor cycles between trace data samples.
Valid values for this setting range from 1 to 65535.
Select between rolling buffer (continuous trace mode) and one-time trace
mode. One-time trace mode will automatically end the trace when the
motion processor’s buffer is filled; rolling buffer mode will continuously
capture trace data and store it in the host computer’s memory until host
virtual memory is exhausted.
Navigator-PC/104 User’s Guide
49
Share Link: 
