STN1110 View Datasheet(PDF) - Unspecified
Part Name
Description
MFG CO.
'STN1110' PDF : 22 Pages View PDF
STN1110
7.0 Electrical Characteristics
This section provides an overview of STN1110 electrical characteristics. Additional information will be provided in
future revisions of this document as it becomes available.
STN1110 integrated circuit is based on PIC24HJ128GP502 device from Microchip Technology. For more detailed
device specifications or clarification, refer to Microchip documentation, available at http://www.microchip.com.
7.1 Absolute Maximum Ratings (1)
Storage temperature ........................................................................................................................ -65°C to +150°C
Ambient temperature under bias ................................................................................................... -40°C to +125°C
Voltage on VDD with respect to VSS ................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to VSS(2) ......................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD ≥ 3.0V(2) ......................................... -0.3V to +5.6V
Voltage on any 5V tolerant pin with respect to VSS when VDD < 3.0V(2) .............................. -0.3V to (VDD + 0.3V)
Maximum current sourced/sunk by PWM/¯V¯P¯W¯, CAN_TX, UART_TX,
PWR_CTRL, O¯B¯¯D¯_¯T¯X¯_¯L¯E¯D, and O¯B¯D¯¯_¯R¯X¯_¯L¯E¯D / I¯N¯T outputs ..................................................................... 12 mA
Maximum current sourced/sunk by any other output ..................................................................................... 4 mA
Note
1. Stresses beyond those listed here can cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at those or any other conditions above those indicated in the operation listings of this specification is not
implied. Exposure to maximum rating conditions for extended periods can affect device reliability.
2. See “Pin Summary” section for the list of 5V tolerant pins.
7.2 Electrical Characteristics
Table 1: Thermal Operating Conditions
Sym
Characteristic
Min
TJ Operating Junction Temperature -40
TA Operating Ambient Temperature
-40
Typ
Max Units
—
+125
°C
—
+85
°C
Conditions
Table 2: Power Specifications
Sym
Characteristic
Min
Typ(1)
Max
Units
Conditions
VDD Supply Voltage
3.0
3.3
3.6
V
VPOR VDD Start Voltage(2)
—
to ensure internal power-on reset
(POR) signal
—
VSS
V
SvDD VDD Rise Rate(3)
0.03
—
to ensure internal power-on reset
(POR) signal
—
V/ms 0–3.0V in 0.1s
AVDD Analog Supply Voltage
Greater of — Lesser of V
VDD – 0.3
VDD + 0.3
or 3.0
or 3.6
AVSS Analog Ground Reference
VBOR Brown-out Reset Voltage(4)
VSS – 0.3 — VSS + 0.3 V
2.40
—
2.55
V
14 of 22
www.obdsol.com
STN1110DSA
Share Link: 
