IDT71L016L100PH View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
MFG CO.
'IDT71L016L100PH' PDF : 8 Pages View PDF
IDT71L016
LOW POWER 3V CMOS STATIC RAM 1 MEG (64K x 16-BIT)
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
VTERM(2)
VTERM(3)
Rating
Terminal Voltage with
Respect to VSS
Terminal Voltage with
Respect to VSS
Com’l. and Ind'l. Unit
–0.5 to +4.6
V
–0.5 to VDD+0.5V V
TBIAS
Temperature Under Bias –55 to +125
°C
TSTG
Storage Temperature
–55 to +125
°C
PT
Power Dissipation
1.0
W
IOUT
DC Output Current
20
mA
NOTES:
3771 tbl 03
1. Stresses greater than those listed under ABSOLUTE MAXIMUM
RATINGS may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other
conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VDD terminals only.
3. Input, Output,and I/O terminals; 4.6V maximum.
RECOMMENDED OPERATING
TEMPERATURE AND SUPPLY VOLTAGE
Grade
Temperature
VSS
VDD
Commercial
0°C to +70°C
0V 2.7V to 3.6V
Industrial
-40°C to +85°C
0V 2.7V to 3.6V
3771 tbl 04
RECOMMENDED DC OPERATING
CONDITIONS
Symbol
Parameter
Min. Typ. Max. Unit
VDD Supply Voltage
2.7 3.0
3.6
V
VSS Ground
0
0
0
V
VIH Input High Voltage
2.0
— VDD+0.3(1) V
VIL Input Low Voltage –0.3(2) —
0.8
V
NOTE:
3771 tbl 05
1. VIH (max.) = VDD + 1.5V for pulse width less than 5ns, once per cycle.
2. VIL (min.) = –1.5V for pulse width less than 5ns, once per cycle.
DC ELECTRICAL CHARACTERISTICS
VDD = 2.7V to 3.6V, Commercial and Industrial Temperature Ranges
Symbol
Parameter
Test Conditions
Min.
|ILI|
Input Leakage Current
VDD = Max., VIN = VSS to VDD
—
|ILO|
Output Leakage Current
VDD = Max., CS = VIH, VOUT = VSS to VDD
—
VOH
Output High Voltage
IOH = –1mA, VDD = Min.
2.4
VOL
Output Low Voltage
IOL = 2mA, VDD = Min.
—
DC ELECTRICAL CHARACTERISTICS(1, 2)
VDD = 2.7 to 3.6V, VLC = 0.2V, VHC = VDD–0.2V, Commercial and Industrial Temperature Ranges
Symbol
Parameter
Test Conditions
Typ.(5)
ICC2 Dynamic Operating Current CS = VLC, Outputs Open,
VDD = 3.6V, f = fMAX(3)
-70 ns
—
-100 ns
—
ICC Static Operating Current
ISB1 Standby Supply Current
CS = VLC, Outputs Open,
WE = VHC, VDD = 3.6V, f = 0(4)
CS = VHC, Outputs Open,
VDD = 3.6V
NOTES:
1. All values are maximum guaranteed values.
2. Input low and high voltage levels are 0.2V and VDD-0.2V respectively for all tests.
3. fMAX = 1/tRC (all address inputs are cycling at fMAX).
4. f = 0 means no address input lines are changing .
5. Typical conditions are VDD = 3.0V and specified temperature.
—
-40 to 85°C
—
0 to 70°C
—
40°C
—
25°C
—
Max.
1
1
—
0.4
Unit
µA
µA
V
V
3771 tbl 07
Max. Unit
45
mA
35
10
mA
10
µA
5
2
1
3771 tbl 08
3
Share Link: 
