M25PE40-VMN6G View Datasheet(PDF) - Numonyx -> Micron
Part Name
Description
MFG CO.
M25PE40-VMN6G
Numonyx -> Micron
'M25PE40-VMN6G' PDF : 62 Pages View PDF
M25PE40
9
Initial delivery state
Initial delivery state
The device is delivered with the memory array erased: all bits are set to ‘1’ (each byte
contains FFh). All usable Status Register bits are 0.
10 Maximum rating
Stressing the device above the rating listed in Table 13: Absolute maximum ratings may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. Refer also to the Numonyx SURE Program
and other relevant quality documents.
Table 13. Absolute maximum ratings
Symbol
Parameter
Min.
Max.
TSTG
TLEAD
Storage temperature
Lead temperature during soldering
–65
150
See note (1)
VIO Input and output voltage (with respect to ground)
–0.6 VCC + 0.6
VCC
VESD
Supply voltage
–0.6
Electrostatic discharge voltage (human body model)(2) –2000
4.0
2000
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the Numonyx
ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous
Substances (RoHS) 2002/95/EU.
2. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω).
Unit
°C
°C
V
V
V
45/62
Share Link: 