M25PE40-VMN6G View Datasheet(PDF) - Numonyx -> Micron
Part Name
Description
MFG CO.
M25PE40-VMN6G
Numonyx -> Micron
'M25PE40-VMN6G' PDF : 62 Pages View PDF
DC and AC parameters
11 DC and AC parameters
M25PE40
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristic tables that
follow are derived from tests performed under the measurement conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
Table 14. Operating conditions
Symbol
Parameter
Min.
Max.
Unit
VCC
TA
Table 15.
Symbol
Supply voltage
Ambient operating temperature
Measurement conditions(1)
Parameter
2.7
3.6
V
–40
85
°C
Min.
Max.
Unit
CL
Load capacitance
Input rise and fall times
30
pF
5
ns
Input pulse voltages
0.2VCC to 0.8VCC
V
Input and output timing reference voltages
0.3VCC to 0.7VCC
V
1. Output Hi-Z is defined as the point where data out is no longer driven.
Figure 25. AC measurement I/O waveform
Input levels
0.8VCC
0.2VCC
Input and output
timing reference levels
0.7VCC
0.3VCC
AI00825B
Table 16. Capacitance(1)
Symbol
Parameter
Test condition
Min.
COUT Output capacitance (Q)
VOUT = 0 V
CIN Input capacitance (other pins)
VIN = 0 V
1. Sampled only, not 100% tested, at TA = 25 °C and a frequency of 25 MHz.
Max.
8
6
Unit
pF
pF
46/62
Share Link: 