M95128-DW3/P View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M95128-DW3/P' PDF : 41 Pages View PDF
DC and AC parameters
M95128, M95128-W, M95128-R
Table 12. DC characteristics (M95128, Device Grade 3)
Symbol
Parameter
Test Condition
Min.
Max. Unit
ILI Input Leakage Current
ILO
Output Leakage
Current
VIN = VSS or VCC
S = VCC, VOUT = VSS or VCC
±2
µA
±2
µA
ICC Supply Current
ICC1
VIL
VIH
VOL(1)
VOH(1)
Supply Current
(Standby Power mode)
Input Low Voltage
Input High Voltage
Output Low Voltage
Output High Voltage
C = 0.1VCC/0.9VCC at 5 MHz,
VCC = 5 V, Q = open
S = VCC, VCC = 5 V,
VIN = VSS or VCC
IOL = 2 mA, VCC = 5 V
IOH = –2 mA, VCC = 5 V
4
mA
5
µA
–0.45 0.3 VCC V
0.7 VCC VCC+1 V
0.4
V
0.8 VCC
V
1. For all 5V range devices, the device meets the output requirements for both TTL and CMOS standards.
Table 13. DC characteristics (M95128-W, Device Grade 6)
Symbol
Parameter
Test Condition
Min. Max. Unit
ILI
Input Leakage Current
VIN = VSS or VCC
±2
µA
ILO
Output Leakage Current S = VCC, VOUT = VSS or VCC
±2
µA
ICC Supply Current (Read)
C = 0.1VCC/0.9VCC at 5MHz,
VCC = 2.5V, Q = open
C = 0.1VCC/0.9VCC at 5MHz,
VCC = 5V, Q = open
3
mA
5
mA
ICC0(1) Supply Current (Write)
During tW, S = VCC,
2.5V < VCC < 5.5V
5
mA
ICC1
Supply Current
(Standby Power mode)
S = VCC, VIN = VSS or VCC,
2.5V < VCC < 5.5V
5
µA
VIL Input Low Voltage
–0.45 0.3 VCC V
VIH Input High Voltage
0.7 VCC VCC+1 V
VOL Output Low Voltage
VCC = 2.5V and IOL = 1.5mA or
VCC = 5V and IOL = 2mA
0.4
V
VOH Output High Voltage
VCC = 2.5V and IOH = –0.4mA or
VCC = 5V and IOH = –2mA
0.8 VCC
V
1. Characterized value, not tested in production.
28/41
Share Link: 
