MPC8349VVAGDB View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
MFG CO.
MPC8349VVAGDB
Freescale Semiconductor
'MPC8349VVAGDB' PDF : 87 Pages View PDF
Ethernet: Three-Speed Ethernet, MII Management
Table 28. MII Receive AC Timing Specifications (continued)
At recommended operating conditions with LVDD/OVDD of 3.3 V ± 10%.
Parameter/Condition
Symbol1
Min
Typ
Max
Unit
RX_CLK clock rise (20%–80%)
tMRXR
1.0
—
4.0
ns
RX_CLK clock fall time (80%–20%)
tMRXF
1.0
—
4.0
ns
Note:
1. The symbols for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for inputs
and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tMRDVKH symbolizes MII receive timing
(MR) with respect to the time data input signals (D) reach the valid state (V) relative to the tMRX clock reference (K) going to
the high (H) state or setup time. Also, tMRDXKL symbolizes MII receive timing (GR) with respect to the time data input signals
(D) went invalid (X) relative to the tMRX clock reference (K) going to the low (L) state or hold time. In general, the clock
reference symbol is based on three letters representing the clock of a particular function. For example, the subscript of tMRX
represents the MII (M) receive (RX) clock. For rise and fall times, the latter convention is used with the appropriate letter:
R (rise) or F (fall).
Figure 12 provides the AC test load for TSEC.
Output
Z0 = 50 Ω
RL = 50 Ω
OVDD/2
Figure 12. TSEC AC Test Load
Figure 13 shows the MII receive AC timing diagram.
tMRX
tMRXR
RX_CLK
RXD[3:0]
RX_DV
RX_ER
tMRXH
tMRXF
Valid Data
tMRDVKH
tMRDXKH
Figure 13. MII Receive AC Timing Diagram
8.2.3 TBI AC Timing Specifications
This section describes the TBI transmit and receive AC timing specifications.
MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 13
Freescale Semiconductor
27
Share Link: 