NT5CC64M16DP-BE View Datasheet(PDF) - Nanya Technology
Part Name
Description
MFG CO.
'NT5CC64M16DP-BE' PDF : 138 Pages View PDF
NT5CB128M8DN/NT5CB64M16DP
NT5CC128M8DN/NT5CC64M16DP
1Gb DDR3 D-die SDRAM
Auto Self-Refresh mode - ASR mode
DDR3/L SDRAM provides an Auto-Refresh mode (ASR) for application ease. ASR mode is enabled by setting MR2 bit
A6=1 and MR2 bit A7=0. The DRAM will manage Self-Refresh entry in either the Normal or Extended Temperature Ranges.
In this mode, the DRAM will also manage Self-Refresh power consumption when the DRAM operating temperature
changes, lower at low temperatures and higher at high temperatures. If the ASR option is not supported by DRAM, MR2 bit
A6 must set to 0. If the ASR option is not enabled (MR2 bit A6=0), the SRT bit (MR2 bit A7) must be manually programmed
with the operating temperature range required during Self-Refresh operation. Support of the ASR option does not
automatically imply support of the Extended Temperature Range.
Self-Refresh Temperature Range - SRT
SRT applies to devices supporting Extended Temperature Range only. If ASR=0, the Self-Refresh Temperature (SRT)
Range bit must be programmed to guarantee proper self-refresh operation. If SRT=0, then the DRAM will set an
appropriate refresh rate for Self-Refresh operation in the Normal Temperature Range. If SRT=1, then the DRAM will set an
appropriate, potentially different, refresh rate to allow Self-Refresh operation in either the Normal or Extended Temperature
Ranges. The value of the SRT bit can effect self-refresh power consumption, please refer to IDD table for details.
Table 16:Self-Refresh mode summary
MR2
A[6]
MR2
A[7]
Self-Refresh operation
Allowed Operating
Temperature Range
for Self-Refresh mode
0
0 Self-Refresh rate appropriate for the Normal Temperature Range
Normal (0 ~ 85C)
Self-Refresh appropriate for either the Normal or Extended Temperature Ranges.
Normal and Extended
0
1 The DRAM must support Extended Temperature Range. The value of the SRT bit
(0 ~ 95C)
can effect self-refresh power consumption, please refer to the IDD table for details.
ASR enabled (for devices supporting ASR and Normal Temperature Range).
1
0
Self-Refresh power consumption is temperature dependent.
Normal (0 ~ 85C)
ASR enabled (for devices supporting ASR and Extended Temperature Range).
Normal and Extended
1
0
Self-Refresh power consumption is temperature dependent.
(0 ~ 95C)
1
1 Illegal
ʳ
REV 1.2
May. 2011
CONSUMER DRAM
© NANYA TECHNOLOGY CORP.
All rights reserved
NANYA TECHNOLOGY CORP. reserves the right to change Products and Specifications without notice.
Share Link: 
