LH543611P-30 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'LH543611P-30' PDF : 57 Pages View PDF
512 x 36 x 2/1024 x 36 x 2 BiFIFOs
TIMING DIAGRAMS (cont’d)
LH543611/21
CKA (CKB)
tRWS tRWH
R/WA (R/WB)
ENA (ENB)
tES
tEH
tRQS tRQH
REQA (REQB)
tHF
tSKEW2 (4)
tHF
HF2 (HF1)
CKB (CKA)
tRWS tRWH
R/WB (R/WA)
tES
tEH
ENB (ENA)
tRQS tRQH
REQB (REQA)
NOTES:
1. A2A, A1A, and A0A all are held HIGH for FIFO access at Port A.
A0B is held HIGH for FIFO access at Port B.
2. Parameters without parentheses apply to FIFO #2 operation.
Parameters with parentheses apply to FIFO #1 operation.
3. Both assertion and deassertion of the Half-Full Flags are controlled
entirely by rising clock edges, rather than by falling clock edges.
4. tSKEW2 is the minimum time between a falling CKB (CKA) edge
and a rising CKA (CKB) edge for HF to change predictably during
the current clock cycle. If the time between the falling edge of
CKB (CKA) and the rising edge of CKA (CKB) is less than tSKEW2,
then it is not guaranteed that HF will change state until the next
following CKA (CKB) edge.
Figure 27. Half-Full Flag Timing, When Synchronized
to a Port Clock Doing Reading
543611-48
39
Share Link: 
