ST7689-G4 View Datasheet(PDF) - Sitronix Technology Co., Ltd.

Part Name

Description

MFG CO.

ST7689-G4

128RGB x 160 dot 65K Color with Frame Memory Single-Chip CSTN Controller/Driver

Sitronix Technology Co., Ltd. 

Prev 31 32 33 34 35 36 37 38 39 40 Next

When entering command: SI= LOW at the rising edge of the 1st SCL.

ST7689

When entering reading command :

If /CS is set to HIGH while the 8 bits from D7 to D0 are entered, the data concerned is invalidated. Before entering

succeeding sets of data, you must correctly input the data concerned again.

In order to avoid data transfer error due to incoming noise, it is recommended to set /CS at HIGH on byte basis to

initialize the serial-to-parallel conversion counter and the register.

7.1.4. 8-bit and 9-bit Serial Interface Data Color Coding

8-bit serial interface (4-line)

(1) R 3-bit, G 3-bit, B 2-bit, 256 colors

There is 1 pixel ( = 3 sub-pixels ) per byte.

Version 1.0

Page 33 of 195

2009/10

Share Link: