ST7FLITE02Y1B6 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
ST7FLITE02Y1B6
STMicroelectronics
'ST7FLITE02Y1B6' PDF : 124 Pages View PDF
ST7LITE0xY0, ST7LITESxY0
EMC CHARACTERISTICS (Cont’d)
13.7.3 Absolute Maximum Ratings (Electrical
Sensitivity)
Based on two different tests (ESD and LU) using
specific measurement methods, the product is
stressed in order to determine its performance in
terms of electrical sensitivity.
13.7.3.1 Electro-Static Discharge (ESD)
Electro-Static Discharges (a positive then a nega-
tive pulse separated by 1 second) are applied to
the pins of each sample according to each pin
combination. The sample size depends on the
number of supply pins in the device (3 parts*(n+1)
supply pin). This test conforms to the JESD22-
A114A standard.
ESD absolute maximum ratings
Symbol
VESD(HBM)
Ratings
Electro-static discharge voltage
(Human Body Model)
Conditions
TA=+25°C
conforming to JESD22-A114
Maximum value 1) Unit
4000
V
Notes:
1. Data based on characterization results, not tested in production.
13.7.3.2 Static Latch-Up
■ LU: Two complementary static tests are
required on 10 parts to assess the latch-up
performance. A supply overvoltage (applied to
each power supply pin) and a current injection
(applied to each input, output and configurable I/
O pin) are performed on each sample. These
test are compliant with the EIA/JESD 78 IC
latch-up standard.
Electrical Sensitivities
Symbol
Parameter
LU
Static latch-up class
Conditions
TA=+25°C
conforming to JESD78A
Class 1)
II level A
Note:
1. Class description: A Class is an STMicroelectronics internal specification. All its limits are higher than the JEDEC spec-
ifications, that means when a device belongs to Class A it exceeds the JEDEC standard. B Class strictly covers all the
JEDEC criteria (international standard).
94/124
1
Share Link: 