LRS1302 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'LRS1302' PDF : 61 Pages View PDF
SHARP
LRS13023
15
NOTES:
1. Refer to DC Characteristics. When VPPIVPP,, memory contents can be read, but not altered.
2. X can be VI, or V,, for control pins and addresses, and VP,, or VP,, for VP,. See DC Characteristics for VW,
and V,,, voltages.
3. i@ at GND&.2V ensures the lowest deep power-down current.
4. See Section 4.2 for read identifier code data.
5. Command writes involving block erase, write, or lock-bit configuration are reliably executed when VPp=VppH and
Vcc=VccIU~=O to 85 “c) . Block erase, byte write, or lock-bit configuration with V,<mkV,
produce spurious
results and should not be attempted.
6. Refer to Table 4 for valid h during a write operation.
7. Don’t use the timing both m and m are VIM
Share Link: 
